Products


Peristaltic Pumps - MCP Process

MCP Process

MCP-Process (drive)

Drive without pump-head
Operating panel
Operating panel MCP-Process
 
PC-programmable
dispensing pump system
IP65-rated 
"washdown" drive
Ordering Information
Order No. for this drive
ISM 915

Interchangeable pump-heads
Click one of the buttons and choose your pump-head ...
Link to single-channel pump-heads
Link to multi-channel pump-heads
Flow rates < 0.001 – 3700 ml/min (depending on mounted pump-head)
Channels 1 24 (depending on mounted pump-head)
Operating panel - 7-button membrane key-pad
- LED display
Memory 4 sets of operating parameters can be stored
Programming
(similar to PLC)
4 individual command sequences programmed in a PC can be stored in  the pump. The user can run the programs using the pump as a stand-alone unit.
Operating modes

- pumping by drive speed (rpm)
- pumping by flow rate (ml/min)
- factory-set flow rates for all available tube sizes
- dispensing by volume (ml)
- dispensing by time (0.1s up to 999hrs)
- dispensing by volume within a pre-set time
- interval dispensing by volume with a pause
- interval dispensing by time with a pause
- setting the number of dispensing cycles
- pause time setting (from 0.1s up to 999hrs)
- roller back-steps for drip-free dispensing
- reversible rotation direction

Calibrating function - for flow rate (ml/min)
- for dispensing volume (ml)
Speed 1 240 rpm
Speed setting rpm, resolution 0.1 rpm
Speed control closed loop control for pressure independent speed
RS232 interfaces - RS232 "in"   - for operation controlling via PC
- RS232 "out" - for cascading up to 8 pumps
Analog input Speed control (05 or 010V / 020 or 420mA)
Analog output Speed monitoring (010VDC or 07.2 kHz)
Digital input (TTL level) Start/Stop, rotation direction, autostart, 2 universal inputs
Digital output (PWM) 2 universal outputs
Differential pressure 1.5 bar (21.7 psi) possible (depending on pump-head and tubing material); small tubing diameters may allow higher pressures
Motor type DC motor
Power consumption 100 W
Mains connection 85 – 264 VAC / 47 – 60 Hz
Protection rating IP 65
Depth / Width / Height 220 x 155 x 260 mm (8 2/3" x 6 1/10" x 10 º") (without pump-head)
Weight 6.9 kg (16 lb) (without pump-head)
Accessories - software "Progedit" (free download)
- software "labwordsoft"
- pressure control unit
- foot switch

 

 

 

 

 

 

 

 

 

 

  Innovative Pump Solutions