Products


Peristaltic Pumps - Ecoline

ECOLINE VC-280
Ecoline VC-280
Microprocessor controlled tubing pump
Characteristics

- high-flow tubing pump for accurate and   reproducible fluid transfer in   laboratories and industry
- rugged stainless steel housing
- accurate and reproducible
  speed-setting
- closed loop control for pressure   independent speed
- interchangeable rotor for lower   pulsation or elevated differential   pressure
- analog interface
Flow rates 1.7 – 5400 ml/min
Channels 1
Speed setting 2-digit potentiometer, 1–99%
Rotor
and tube-bed		 - 2 stainless steel rollers
- tube-bed with translucent protection   cover
- rotor cover with 180° opening angle
- safety cutout when rotor cover is   open
Remote control analog interface

ECOLINE VC-380
Ecoline VC-380
Microprocessor controlled tubing pump
  Same as VC-280 but
Characteristics - 3 rollers providing lower pulsation
- slightly lower maximum flow rate
Flow rates 1.6 – 5000 ml/min

ECOLINE VC-360
Ecoline VC-360
Microprocessor controlled tubing pump
  Same as VC-280 but
Characteristics - 3 rollers providing lower pulsation
- reduced flow rate due to smaller tube   sizes
- hinged tube-bed with wide opening   angle allowing
  rapid tube change-over
- no interchangeable rotor
- no safety cutout
Flow rates 0.25 – 1300 ml/min
ECOLINE
VC-MS/CA8-6
Ecoline VC-MS/CA8-6
Microprocessor controlled tubing pump
... Same as VC-280 but
Characteristics - 8-channel pump-head
- Click'n'go cassettes providing defined   and reproducible occlusion conditions
- 6 rollers for low pulsation
- takes 3-stop collared tubing
- no interchangeable rotor
- no safety cutout
Flow rates 0.005 – 150 ml/min (per channel)

 

 

  Innovative Pump Solutions